SUB2000.

The UpLULA® loader made by Maglula®, is a military-grade, pocket-size, universal pistol magazine loader and unloader designed to load and unload nearly all 9mm Luger up to .45ACP single and double stack magazines of all manufacturers. It also loads most .380ACP single and double-stack mags, and 1911’s mags. The UpLULA® loader self-adjusts to the magazine and loads it easily, painlessly, and reliably.

This accessory is designed to replace the SUB2000 Bolt (Part #: SUB2000-152-Bolt. In some older GEN 1’s: SR-152-Bolt). By replacing the standard bolt in the SUB2000 with a heavier bolt, there is less felt recoil due to the blowback design of the weapon.

Sub-431: Additional Picatinny Rails are to be used only with SUB2000-420 Aluminum Forends.

SUB-420: Aluminum Forend with space for up to FOUR Picatinny rails. This replaces your old SUB2000 forend with a high-quality, durable bi or quad rail. Recommended for the 1st gen Sub 2000 only. This kit is available as full mounting kit with all Four (4) Rails. 2nd gen sub 2000: With this accessory installed, you will not be able to lock the firearm in the folded position. Will not fit on the 3rd gen Sub2000.

1ST GEN SUB 2000

SUB-397: Picatinny Rail for SUB2000. Attaches conveniently to the bottom of the forend.

This compact forend will fit on the 1st gen and the 2nd gen Sub 2000. SUB-350: Compact Forend for SUB2000. Replaces the current forend with a lighter, more compact version. Note: When installed on the 2nd gen Sub 2000, it will not lock in the folded position.

1ST AND 2ND GEN SUB 2000

CAN BE USED WITH THE 1ST, 2ND OR 3RD GEN SUB 2000

OEM Thread Protector Long for the KelTec Sub2000 2nd Gen (9mm & 40 Cal). S2K Part Number 803. This accessory is used to protect the sight body threads on the SUB2000 barrel, if the front sight is removed.

OEM Thread Protector (9mm) for the KelTec Sub2000 2nd Gen. S2K Part Number 532-9.

OEM Mag Catch Kit - S&W59 for the KelTec Sub2000 2nd Gen. S2K Part Number 205. Note: THE MAG CATCH PLATES WILL ONLY WORK IN THE GEN 2 SUB2000 FIREARM, WHICH STATES “MULTI MAG” ON THE LEFT HAND SIDE OF THE GRIP. Includes 1 Mag Catch Plate (Smith & Wesson 59), 1 Hex Key, and 2 screws.

OEM Mag Catch Kit - Sig P320 for the KelTec Sub2000 2nd Gen. S2K Part Number 205. Note: THE MAG CATCH PLATES WILL ONLY WORK IN THE GEN 2 SUB2000 FIREARM, WHICH STATES “MULTI MAG” ON THE LEFT HAND SIDE OF THE GRIP. Includes 1 Mag Catch Plate (Sig P320), 1 Hex Key, and 2 screws.

OEM Mag Catch Kit - Sig P226 for the KelTec Sub2000 2nd Gen. S2K Part Number 205. Note: THE MAG CATCH PLATES WILL ONLY WORK IN THE GEN 2 SUB2000 FIREARM, WHICH STATES “MULTI MAG” ON THE LEFT HAND SIDE OF THE GRIP. Includes 1 Mag Catch Plate (Sig P226), 1 Hex Key, and 2 screws.

OEM Mag Catch Kit - Smith & Wesson M&P for the KelTec Sub2000 2nd Gen. S2K Part Number 205. Note: THE MAG CATCH PLATES WILL ONLY WORK IN THE GEN 2 SUB2000 FIREARM, WHICH STATES “MULTI MAG” ON THE LEFT HAND SIDE OF THE GRIP. Includes 1 Mag Catch Plate (Smith & Wesson M&P), 1 Hex Key, and 2 screws.

OEM Mag Catch Kit - CZ75 for the KelTec Sub2000 2nd Gen. S2K Part Number 205. Note: THE MAG CATCH PLATES WILL ONLY WORK IN THE GEN 2 SUB2000 FIREARM, WHICH STATES “MULTI MAG” ON THE LEFT HAND SIDE OF THE GRIP. Includes 1 Mag Catch Plate (CZ75), 1 Hex Key, and 2 screws.

OEM Mag Catch Kit - Beretta 92 & 96 for the KelTec Sub2000 2nd Gen. S2K Part Number 205. Note: THE MAG CATCH PLATES WILL ONLY WORK IN THE GEN 2 SUB2000 FIREARM, WHICH STATES “MULTI MAG” ON THE LEFT HAND SIDE OF THE GRIP. Includes 1 Mag Catch Plate (Beretta 92/96), 1 Hex Key, and 2 screws.

This Featureless Compliance Kit for the SUB2000 Gen 2 is designed to help you stay compliant with state regulations while preserving the functionality and compact design that make the SUB2000 Gen 2 a favorite among firearm enthusiasts. This kit includes a grip fin and a non-adjustable stock. The non-adjustable stock is identical to the original only it’s permanently fixed at it’s longest adjustment.

This Featureless Compliance Kit for the SUB2000 Gen 3 (9MM Glock^® Configuration) is designed to help you stay compliant with state regulations while preserving the functionality and compact design that make the SUB2000 Gen 3 a favorite among firearm enthusiasts. This kit includes a grip fin and a non-adjustable stock. The non-adjustable stock is identical to the original only it’s permanently fixed at it’s longest adjustment. This can only be used on the 3rd generation SUB2000 configured for 9MM Glock^® (GLK) magazines. Installation Instructions

This is our medium sized Universal Hard Case which lends itself perfectly to a folded SUB2000 or a KelTec pistol with room to spare.

M*CARBO bolt tube cover for the KelTec SUB-2000 Gen 2. Rubber cheek pad protects your face from the steel bolt tube, absorbs shock and resists solvents, heat and UV. Installs in about 10 minutes without affecting the folding or locking function. Made in the USA.

The versatile Light Mount V-Block and Rings is a nearly-universal mounting solution for attaching a handheld light to compatible Magpul^® light mounts. Constructed of reinforced polymer and milspec-anodized aluminum, the Light Mount V-Block and Rings allow the user to install lights with a body diameter from .75″ to 1.04″ onto the MOE Scout Mount as well as a variety of M-LOK Cantilever and Offset Mounts in both Aluminum and Polymer*.