Customer Reviews (26)
Install correctly & use Locktite
Review by gerald tomlin
Posted on 03-28-2013 17:00:15
This shoe is fantastic and helps tremedously. #1 polish the inside of the trigger gurard. #2 Don't overtighten the screws #3 use locktite or super glue. Summary = good trigger and no future problems
Nice accessory - P-11
Review by JC in Florida
Posted on 03-02-2013 21:47:31
Installed about a year ago per instructions, shot only about 100 rnds... still tight, no pinching, better accuracy, more comfortable to shoot. Should be standard factory trigger. I carry it almost everyday - no problem so far.
Not comfortable, possibly unsafe
Review by Mark
Posted on 01-18-2013 10:49:37
This could make a reliable pistol unsafe, If this worked loose during a critical incident the trigger could become blocked.
You may have to throw the pistol at the bad guy and run. It also pinched my finger during trigger reset.
Review by Robert Jeeter
Posted on 11-27-2012 15:12:55
So many good reviews, I thought I'd give it a try. This is an add on I could do without. It pinches my trigger finger on reset. It does make the trigger easier to pull if you are very young or old.
Review by James
Posted on 11-02-2012 19:00:46
Pretty much useless. It's too wide, sharp, and falls off easily.
Didnt Work For Me
Review by WVMTN
Posted on 03-18-2012 12:28:55
Purchased this accesssory and took the gun to the range. It came loose after about 60 rounds. Seems as though it doesnt bite enough into the trigger but rather catches on the edge disallowing a good mount. Disappointed.
Save your money on this thing
Review by Chris Klinger
Posted on 03-17-2012 23:03:37
I thought this would be a nice part but i was wrong. I had it professionally installed by a gunsmith, he used loctite, after 40 rounds this thing fell off. It also hurt your finger when shooting with it on.
Review by Dane Vierow
Posted on 03-03-2012 03:34:16
Shoe I received for my PF-9 was not as shown in the photo--it had very square corners which extend outside the trigger guard and no ridges. I spent about an hour with a Dremel tool and files shaping it to trim off the sharp corners; now it feels great.
A Must for the P11
Review by Frank
Posted on 03-02-2012 20:48:03
Makes a larger surface area for finger reduces finger from pinching on bottom of trigger guard. Use loctite follow directions and take time will fit, work and look great
you need this
Review by jeffrey schillinger
Posted on 02-29-2012 10:13:43
lost the first one i bought at outdoor range..didn't have it secured. definitly will secure this one. a major improvement for a minimum cost.
Review by Thomas Smith
Posted on 01-29-2012 23:42:01
Put one these on my P11. Made a huge difference. Great product you should get one.
Review by Robert DeWitt
Posted on 12-16-2011 22:31:18
The shoe has helped a lot on the pain I was having pulling the trigger. Came off a couple times. Used locktite on screws and a spot of glue where shoe attaches to trigger. Has stayed in place after two hours of shooting.
I like it so far
Review by Brent Burton
Posted on 11-04-2011 13:17:03
Made the 8.5lbs pull on my P11 much more comfortable. Easier to stage trigger. Time will tell if it stays on though. I did counter sink and lock tight set screws.
Note: mine did not have the ridges as in the photo.
Review by Jasan
Posted on 10-28-2011 16:46:48
was great until it fell off one day while carrying it, never knew it until i got home
Review by Brady Glover
Posted on 10-01-2011 13:11:20
should have came factory love keltec rubber grip must have too
must have but needs better screws
Review by Brady glover
Posted on 10-01-2011 13:07:30
must have im havein prob with it staying on yes i used loctite remind u i shot alot it stil slipes off after screwing on agen and agen started to strip had no choose but to glue big no no a better system would help or something but yes
Review by Scott Wallace
Posted on 09-21-2011 13:47:26
A great improvement in comfort and perceived pull weight. I used a small hand drill to recess the trigger surface at the Allen screw contact points so they won't slip around. Use Locktite Blue to prevent back out. Don't glue the shoe on!
Review by Jerry M.
Posted on 07-24-2011 16:28:27
This was a good purchase for my PF-9. It feels much better in the hand. Easy install
Review by Scott young
Posted on 05-25-2011 22:09:54
A must have.
Review by Bill M., Green Bay WI
Posted on 05-20-2011 07:20:17
Undoubtedly get this for your P-11 and your PF-9--before your first range visit if possible. Can I respectfully suggest that a wide trigger like this add-on should actually come standard on both?
Review by Jamaal Young
Posted on 05-12-2011 19:19:06
Easy set up. Can't wait to go to the range and test it.
please remove all but one ot the Jack***** comments jerks like him get only 1 vote.. Thank god
Review by Bryon
Posted on 04-09-2011 13:46:15
good product ... use locktite
Review by Headhunter
Posted on 04-08-2011 20:33:39
It definitely makes the gun more accurate, it's a must too own
Review by GARY
Posted on 04-04-2011 15:31:35
This a must if you own a PF-9 it makes the Gun alot more comfortable to shoot and in turn makes it more accurate.the screws work loose just use loctite and problem sloved.
An essential aid to this pistol
Review by Flyfisher
Posted on 01-07-2011 08:58:05
This is a must-have accessory for the PF-9. Users with any size hand will benefit from it. Makes the gun much more comfortable and accurate.
Just get it
Review by Boogster
Posted on 09-08-2010 14:59:59
It makes the pistol much easier to shoot, increasing accuracy. Just get it.
Write Your Own Review