• Wish List (0)
    • 321.631.0068
    Back
    SUB-2000 Aluminum Forend w/ Picatinny Rail


    SUB-2000 Aluminum Forend w/ Picatinny Rail

    • Out of Stock
    •   |  
    • SKU:

    # Rails:

      |    Bookmark

    Pricing Comparison:

    $0.00
    €0.00
    ¥0.00
    £0.00
    z0.00
    r0.00

    Customer Reviews (21)

    • Page of 1
    • Displaying 1 to 21 of 21 items
    • Items Per Page:  
    Poor design, cheap hardware
    Review by Alex E.
    Posted on 05-09-2013 08:12:06
    You will have to purchase your own screws and use Red Loctite on the clamp surface to keep it in place.
    Screw problems
    Review by Nicholas blunt
    Posted on 04-13-2013 00:55:38
    The Allen wrench screw design is a horrible idea to use with the barrel clamp. Both Allen screws stripped out and the clamps are not even close to being tight on my barrel!
    s2k fore end
    Review by Bobby yonce
    Posted on 03-26-2013 22:03:50
    Kick ass product, easy installation, super fast delivery, light weight, well built, and anyone who says bad about it had to have gotten a defective one. Very happy customer, constant bragger, and you should give me a job
    Great rail, Excellent service!
    Review by Chris
    Posted on 02-17-2012 13:37:46
    Fits great easy to install and minimal weight gain to firearm. Another great product from KEL-TEC! On top of that fast shipping!
    Sub 2000 Quad Rail
    Review by Bill Zavalas
    Posted on 01-14-2012 18:57:13
    I put this on my 9mm and followed directions and use the screw lock provided in the kit and it works perfectly well. I would recommend it to anyone plus it doesn't cost an arm and a leg. Very good KelTec, Thanks.
    Love it
    Review by George C
    Posted on 10-17-2011 11:39:42
    Got mine a few days ago. Got it on the gun easy enough, went out and shoot 200 rounds the next day and its still rock solid. It helps to clean the screws off VERY well (I used break cleaner) so that the locktite can do its job better.
    Just shy of 5 stars
    Review by Roger White
    Posted on 10-07-2011 03:32:53
    I think product would benifit from some sort of locking lug to set and maintain top dead center with the bore and save set up time to get top rail level if using it to install scopes/ optics.
    sweetness on a folding boomstick
    Review by Bar.
    Posted on 08-30-2011 13:34:28
    Gen 2 rail. Instructions were easy to follow.Kit comes complete with blue thread lock. That said, I Followed the tips on KTOG = no loosening. Overall the rail rocks!
    Great rail system
    Review by Christopher P
    Posted on 08-04-2011 17:53:44
    Ive bought most the accessories for my sub2000 and this was by far the best investment. =p
    Review by David Kennedy
    Posted on 07-23-2011 23:45:01
    I installed a 2nd gen quad rail on mine and it works great. I just wish the instructions didn't say that the loctite was optional. I didn't put it on mine and after the first 75 rnds I had to tighten it. An awesome piece and almost a must have.
    Glad for it
    Review by Carl
    Posted on 07-03-2011 11:02:05
    Put a few hundred rounds through the gun after installing rails. Having to tighten barrel clamps, use loctite. Have installed red dot and vertical front grip. With a stack of 33 round Glock mags, this thing is a really fun gun.
    Review by neil
    Posted on 05-10-2011 00:28:45
    its much better than the stock rail system the only down fall is that the quad rail system is not centered and sits lower on the barrel (in order to fold) .
    Looks Great on the Rifle but keeps Coming Apart
    Review by Ron
    Posted on 04-20-2011 23:17:25
    I used a liberal amount of RED Loctite on all screws during assembly then let it cure up for a couple weeks before firing any rounds. The lower picatinny rail fell off the rifle with less than 100 rds fired.
    Review by Mike
    Posted on 03-25-2011 16:21:32
    i got a 2 rail, 2nd gen, forearm. works great no problems. remove all screws and use red loc-tite the first time. you won't be dissapointed!!!
    Excellent Quads for Sub2K .40!
    Review by Hawaiian 007
    Posted on 03-14-2011 23:10:45
    It was a straight forward process. No problems at all. I say it's solid and cool looking. 1st Gen. quad rail responses should not be listed with 2nd Gen. in order to get accurate reviews. Thanks KEL TEC for the innovative firearms you folks put out.
    love it!
    Review by Kevin Eldredge
    Posted on 02-27-2011 20:57:07
    this thing is great i have had 0 problems with it although i did read these forums before it came in the mail and built it with red lock tight on every screw shot 300 rounds threw it today
    Love the Gen 2 Quad rail
    Review by Tom Dillon
    Posted on 02-13-2011 14:41:42
    I recently installed the Gen 2 quad rail on my Sub2000. After running over 300 rounds through it it is still rock solid on the gun. It was very easy to install with the instructions provided.
    Kel Tec stands behind their products
    Review by Steve Champion
    Posted on 02-09-2011 08:14:31
    My quad rail came loose after a year.I contacted Kel Tec and was told that they now use steel rings to mount to the gun and they would be sending me a replacement. Thanks Kel Tec. 31/2 stars for product and 5 stars for the company.
    I like mine
    Review by Arik H
    Posted on 02-08-2011 15:16:11
    Have it installed on a 9mm. Not having issues described in other reviews. Follow the instructions & take your time with the install.
    Works good
    Review by Ty C
    Posted on 02-07-2011 08:16:22
    Hey guys, use red loctite. I have over 300 rounds (after using red) and it has not rattled loose. Patience and ingenuity, enjoy your rail.
    I Like It
    Review by Arnold Schwartz
    Posted on 01-19-2011 19:08:00
    This revision of the Quad rail rocks. Ir fits well and does not twist. I would recommend buying stainless steel screws to replace the Keltec screws. Otherwise its great
    • Page of 1
    • Displaying 1 to 21 of 21 items
    • Items Per Page:  

    Write Your Own Review

    Kel-Tec CNC Industries, Inc

    PO Box 236009 Cocoa, Fl 32923
    Phone: 321-631-0068 Fax: 321-631-1169

    Get it first: specials, sales + more!

    Copyright © 2010 Kel-Tec CNC Industries, Inc.

    Ecommerce Design by Blue Fountain Media