• Wish List (0)
    • 321.631.0068
    Back
    PMR-30 111 Assembly Pin


    PMR-30 111 Assembly Pin

    • In Stock
    •   |  
    • SKU: PMR30-111
    $5.88

    Qty: 

      |    Bookmark

    Pricing Comparison:

    $5.88
    €4.10
    ¥543.37
    £3.59
    z8.63
    r185.93

    Customer Reviews (25)

    • Page of 1
    • Displaying 1 to 25 of 25 items
    • Items Per Page:  
    customer service
    Review by John Clark
    Posted on 05-03-2013 19:42:37
    The assembly pin broke on 24Apr13 and I sent an email requesting a new one. Received it today 3May13. Can't complain about this service, I'm going to order some backups tomorrow.
    I dont know what these other guys are talking about.
    Review by Patrick Champa
    Posted on 05-02-2013 12:22:13
    I have fired 5000 rounds of various types of ammo though my PMR-30 and have never had a single problem with this pin. I use two different slides but always the same pin. I can only assume people are torquing the pin or something.
    Great Customer service
    Review by CalCustomer
    Posted on 04-25-2013 13:53:44
    Pin broke after less than 800 rds.
    Keltec rep explained that on an early run the pin groove was too deep, causing the easy breakage.
    Sent me new pin with no questions asked.
    WTF
    Review by Theman
    Posted on 04-25-2013 00:06:10
    This pin is poorly made and a new replacement should be sent to any owner who experiences a failure at no charge.
    it is a potential safety as well as obvious operational issue.
    First replacement
    Review by John Clark
    Posted on 04-24-2013 14:16:03
    I have approx 2500 rds through before it broke today, wish I had read the other reviews before, still going to buy 3-4 for backup most accurate gun I've owned
    Wasted cash. Buy a Taraus 991 22wmr
    Review by DynaRider
    Posted on 03-14-2013 20:05:52
    Less than 500 rounds and she breaks. I have a 50 year old ChiCom trust more than pmr30. Guess you could always throw it at attackers.
    shooters are pay'n crazy money for crap
    Review by John Hale
    Posted on 03-14-2013 19:58:18
    Brother-in-law asked if I knew how to break down a keltech pmr30. Just shoot it. Heard Toyota has skilled CNC techs. KelTech should take some lessons.
    Assembly Pin
    Review by Good Brother
    Posted on 03-04-2013 10:29:05
    Pin broke after several hundred rounds
    Worst customer service ever encountered
    Review by Don Taylor
    Posted on 02-25-2013 23:35:14
    .Kel Tec does NOT answer the phone, reply to emails or snail mail. The gun is a blast to shoot and is extremely accurate, but this pin issue and their lack of response really sucks.
    It fits - but that's it
    Review by Gary Kunz
    Posted on 02-24-2013 20:51:49
    Only three hundred rounds of ammo recommended by Kel-Tec and it broke in half. Only half of the pin was there when I removed to clean pistol.
    wish I would have known
    Review by jason langreder
    Posted on 02-19-2013 13:08:50
    How hard could it be to make a suitable assembly pin?.Kel-Tec's claim to fame
    is innovative design.For a CNC shop to have issues with a pin makes me question any future kel-tec purchases, just my two
    cents.
    Mine broke to
    Review by Jason Dobbins
    Posted on 02-11-2013 14:34:55
    I tried to get it replaced was on hold for 45 minutes. As for my broken one I have about 500 rounds through it didn't even notice until I went to clean it. I am thinking this being broken might have been is the reason I had so many jams
    Junk
    Review by Allen llweiss
    Posted on 01-26-2013 11:53:22
    Although the gun is a blast but not usable for self defense
    Pin Broke
    Review by Grant
    Posted on 01-23-2013 17:15:56
    6 months old and assembly pin broke while shooting. looks like it's made out of pop metal or pewter....cheap
    Review by PMR Owner
    Posted on 01-21-2013 17:04:08
    I have had two of these snap in half, both only made it to about 500 rounds. It is almost laughable how weak this part is. If the pistol wasnt such a fun shooter I would not be very happy. KelTech... Fix this already or offer free replacements.
    Assembly Pin sucks
    Review by Gun owner
    Posted on 01-03-2013 09:31:02
    Gun is awesome but this assembly pin is BS. Atleast now I know to never carry this gun for protection. Great for squirrels or target shooting but by no means ready to use for self defense.
    broken assembly pin.
    Review by Kelvin Thompkins
    Posted on 12-28-2012 13:26:35
    I have had so much fun with this gun. But the assembly pin problem scares me. Its a safety problem that makes shooting the gun a serious safety issue for me. A stainless steel pin would easily solve this problem.
    Not a good pin
    Review by David Lewis
    Posted on 12-03-2012 15:42:42
    Breaks in the middle, looks like pig iron. no excuse for it to break.
    Sad
    Review by David Ridlen
    Posted on 11-22-2012 18:33:21
    How can such a sweet gun fail in this area. This is my SECOND pin, which should never fail. VERY dissapointed. Why??? RECALL
    Review by Hando
    Posted on 11-18-2012 15:30:43
    It is unacceptable that this critical part fails at all, nevermind as frequently as it does. Keltec should do the right thing and recall that part. I will be buying one for now.
    Review by Andre Burns
    Posted on 11-12-2012 05:17:30
    I agree this is a safety issue and should be replaced at no cost or do a recall for this defective part. I will be replacing my broke pin also.
    assembly pin
    Review by Gaylon Buck
    Posted on 11-02-2012 19:18:32
    My assembly pin broke also.
    I love the gun but is this problem being addressed by Kel Tec?
    I will order two for now, but I think Kel Tec should send them to us at no charge.
    snapped at 750 rounds
    Review by scott wadyko
    Posted on 10-21-2012 17:01:08
    sheared right in half.
    that sucks because it is really fun to shoot
    I agree with Jerry
    Review by John Rupp
    Posted on 10-12-2012 15:26:28
    Less than 1000 rds and it's broke already.
    Tends to break
    Review by JERRY NASSAR
    Posted on 03-16-2012 21:16:44
    It tends to break. I change it twice already
    • Page of 1
    • Displaying 1 to 25 of 25 items
    • Items Per Page:  

    Write Your Own Review

    Kel-Tec CNC Industries, Inc

    PO Box 236009 Cocoa, Fl 32923
    Phone: 321-631-0068 Fax: 321-631-1169

    Get it first: specials, sales + more!

    Copyright © 2010 Kel-Tec CNC Industries, Inc.

    Ecommerce Design by Blue Fountain Media