• Wish List (0)
    • 321.631.0068
    Back
    PF9-181 Extractor


    PF9-181 Extractor

    • In Stock
    •   |  
    • SKU: PF9-181
    $4.00

    Qty: 

      |    Bookmark

    Pricing Comparison:

    $4.00
    €2.79
    ¥369.64
    £2.44
    z5.87
    r126.48

    Customer Reviews (9)

    • Page of 1
    • Displaying 1 to 9 of 9 items
    • Items Per Page:  
    extractor
    Review by Robert Eckard
    Posted on 11-15-2012 14:39:10
    Will not extract shell jam 2nd round into empty shell in chamber. Hard to remove magazine to clear live round and use a rod to push empty shell out of barrel I own PMR-30 and love it. the pf9 shoots high so I will try shims.
    Bend extractor spring to help extract
    Review by Bill Bradley
    Posted on 03-02-2012 14:30:55
    Like everyone else said, it wouldn't extract shells. But this problem can easily be fixed. Be firm and slightly bending inward the extractor spring with your hands. It helps push the extractor closer to the casing to grab. Extracts perfect now.
    will not extract
    Review by Ben
    Posted on 02-15-2012 00:22:57
    Spent round will not eject from barrel!!!
    Barrel's the problem?
    Review by Scott Jezak
    Posted on 12-16-2011 16:52:35
    Have failures to extract with PF9 barrel, swapped it with a polished P-11 barrel, no problems. Are there scratches on your fired casings?
    Kel Tec PF9
    Review by Charles Steinman
    Posted on 10-14-2011 13:02:14
    Incomplete casing extraction results in 3 hands required to clear. Kel Tec is sending replacement extractor. Hope it works. All other Kel Tec pistols worked fine.
    Casings still stick / not as much
    Review by Chuck Farrington
    Posted on 10-12-2011 09:27:46
    I was getting 1 to 3 stuck casings per mag load. Called Kel-Tec, they sent out new extractor. Fired 100 rounds/ had 3 stuck casings. Not good enough for concealed carry.
    Failure to extract
    Review by William
    Posted on 08-19-2011 13:48:31
    The PF-9 handgun will not extract the spent brass. Kel Tec mailed me new parts and they are also failures. I am at $45 in range fees on a failure of a firearm.
    Review by Sam Walker
    Posted on 07-19-2011 18:43:45
    will not extract spent round. casing stays in barrel
    kel tec pf9
    Review by brian velez
    Posted on 05-30-2011 15:43:45
    casing not exstracting out of barriel after firing.and locks up casing stays in barriel
    • Page of 1
    • Displaying 1 to 9 of 9 items
    • Items Per Page:  

    Write Your Own Review

    Kel-Tec CNC Industries, Inc

    PO Box 236009 Cocoa, Fl 32923
    Phone: 321-631-0068 Fax: 321-631-1169

    Get it first: specials, sales + more!

    Copyright © 2010 Kel-Tec CNC Industries, Inc.

    Ecommerce Design by Blue Fountain Media